EVS XS User Manual Page 20
- Page / 103
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3.2. Power Supply
Redundant Power Supply
The server is fitted with two auto switching and hot-swappable power supplies.
The secondary hot-swappable power supply should be connected to the mains to allow
automatic power switching to this second power supply should the first one fail.
Grounding
Warning
The protective earth must be connected to the ground before powering up the
unit.
Ensure the disk recorder unit is properly grounded at all times to avoid electrical
shock hazard.
Electrical Specifications
Rated voltage: 115 to 240 VAC (single phase)
Rated frequency: 47-63 Hz
Input connector: CEE 22/IEC 320 3-pin male receptacle
Connection to supply: Pluggable equipment Type A (EN60950 §1.2.5): Equipment which
is intended for connection to the building power supply wiring via a non-industrial plug and
socket-outlet or a non-industrial appliance coupler or both. Correct mains polarity must
always be observed. Do not use reversible power plugs with this equipment.
Class of equipment: Class 1 equipment (EN60950 § 1.2.5): electric shock protection by
basic insulation and protective earth.
Electrical Consumption
The following electrical specifications are valid for the XS 6U server:
Data Type Voltage Value
Inrush current (PSU plugged on power grid) 230 V 3.6 A
Maximal current (full load, CPU at 100% ) 230 V 1.5 A
Inrush current (PSU plugged on power grid) 115 V 7.6 A
Maximal current (full load, CPU at 100% ) 115 V 3.2 A
Maximal power consumption (full load, CPU at 100%) - 350 W
12 3. Hardware Specifications
EVS Broadcast Equipment S.A. Issue 11.02.A July2013
- Technical RefeRence 1
- HARDWARE 1
- Copyright 3
- Disclaimer 3
- Improvement Requests 3
- Regional Contacts 3
- User Manuals on EVS Website 3
- Table of Contents 4
- 6. BOARDS DESCRIPTION 71 5
- 6.6. MTPC A3/A6 Board 91 6
- What's New? 7
- 1. Overview 9
- 2 1. Overview 10
- 2. Safety and Compliance 11
- 2.3. EMC Warning 12
- 2.4. FCCMarking 13
- 2.5. CE Marking 13
- 3. Hardware Specifications 14
- 3. Hardware Specifications 7 15
- Dimensions 16
- Top view 17
- 3.1.3. SAS-HDX Unit 18
- 3.1.4. Control Devices 19
- 3.2. Power Supply 20
- 3.3. Environmental Conditions 21
- 4. Software Specifications 22
- 4.2. Audio Specifications 23
- Audio Processing 24
- 4.3.1. Supported Codecs 25
- 18 4. Software Specifications 26
- 4.3.2. Maximum Bitrates 27
- 4.3.3. Internal Bandwidth 28
- 4. Software Specifications 21 29
- 4.3.4. Recording Capacities 30
- 4. Software Specifications 23 31
- 24 4. Software Specifications 32
- 4. Software Specifications 25 33
- 26 4. Software Specifications 34
- 4. Software Specifications 27 35
- 28 4. Software Specifications 36
- 4.4. Network Transfers 37
- XNet Transfers 38
- Backup Transfers 38
- Restore Transfers 39
- General Description 39
- Important Recommendations 40
- 4.4.3. XF2 Capacities 42
- 4. Software Specifications 35 43
- 4.5. Video Interpolation 44
- 4-Line Interpolator 45
- 5. Hardware Installation and 46
- 5.2. Rear Panel Description 47
- Video and Codecs 48
- Analog and Digital Audio 48
- RS422 Ports 49
- Controls and Communications 50
- Power Supplies 51
- 5.2.3. 5U Rear Panel Layout 52
- Digital Audio 54
- Analog Audio 54
- 5.3. Video Connections 57
- 5.4. Audio Connections 57
- 5.5. RS422 Connections 61
- 5.6. XNet Network 62
- 5.6.2. Network Architectures 63
- 5.6.4. Starting XNet 66
- 5.7. Gigabit Network 67
- 5.7.2. Backup of Clips 69
- 5.7.3. Restore of Clips 70
- 5.7.4. Important Rules 71
- 5.7.5. Switches 72
- Additional Information 73
- 5.8. GPIOConnections 74
- Specifications 75
- TTL Inputs (GP In 5, 6, 7, 8) 76
- 5.8.3. GP Out Connections 77
- 6. Boards Description 79
- 6.2.1. Description 80
- Block Diagram 81
- Base Board Jumpers 82
- Base Board LEDs 82
- V3X COD Modules LEDs 83
- Connector Assignments 83
- 76 6. Boards Description 84
- Connector Layouts 85
- 78 6. Boards Description 86
- Connectors Layouts 88
- Link 3G-SDI 89
- 6.2.5. Channel Assignment 91
- 6.3. Audio Codec Board 92
- 6.4. H3X Board 93
- LEDs Function 94
- Connectors 94
- Gigabit Connectors 94
- 6.5. RAID Controller Boards 95
- 88 6. Boards Description 96
- LEDs on the External Array 97
- Sound Alert on External Array 97
- Disk Insertion and Removal 98
- 6.6. MTPC A3/A6 Board 99
- Illustration 100
- Multiviewer 101
- LED Information 101
- Board Configuration 101
- 94 6. Boards Description 102
Related products and manuals for Servers EVS XS
Servers EVS XS User Manual
(98 pages)
(98 pages)
Servers EVS XT2+ User Manual
(87 pages)
(87 pages)
Servers EVS XT2+ User Manual
(234 pages)
(234 pages)
Servers EVS XT-3 User Manual
(4 pages)
(4 pages)
Servers EVS XT-3 User Manual
(105 pages)
(105 pages)
Servers EVS GX User Manual
(66 pages)
(66 pages)
Servers EVS XT-3 User Manual
(69 pages)
(69 pages)
Servers EVS XT-3 User Manual
(86 pages)
(86 pages)
Servers EVS XT2+ User Manual
(85 pages)
(85 pages)
Servers EVS XT-3 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 0.029 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals