EVS Multicam LSM User Manual download pdf (Page 164)

Assigning Keywords in List Mode

To assign keywords to a clip in list mode, recall the clip, then press MENU to access the

secondary clip menu on the Remote Panel.

1player_B101232action_

6890123keyword8901

F1:action_1F6:action_6

F2:action_2F7:action_7 111A

F3:action_3F8:action_8

F4:action_4F9:Prev.pagep.01

F5:action_5F0:Next page

Push Aux Clip Sort->TC PostRoll

>Archive *** Name Cam

The LCD displays a page containing 8 keywords. Press F9/F10 to access the

previous/next keywords page. To assign a keyword to the current clip, press the F_ key

corresponding to the desired keyword on the LCD display.

Depending on the CLIP/CAM mode defined by the D key, the selected keyword will be

assigned only to the camera angles loaded on the channels fully controlled by the operator

at that time (CAM mode), or to all camera angles of the clip (CLIP mode). The keyword

will be assigned to the first available keyword location on the 1

line of the LCD display.

If the Keyword Info parameter of the Operational Setup menu (P.1.1 F2) is set to “Yes”, it

will also appear on the OSD of the corresponding output monitors if the current picture is

the Short IN point of the clip.

If all three keywords locations are occupied, the operator has to clear some of them to be

able to assign a new keyword to that clip.

To clear one of the keywords already assigned, press CLEAR+F1 / F2 / F3 in the

secondary clip menu.

The clip can also be named based on the keywords. Press the Name function (C key) in

the secondary menu, then select keywords. The keywords will be added to the name of

the clip, up to 12 characters. In this mode, the name of the clip is visible on the OSD. It

can also be edited with the following keys:

• CLEAR: erases the last character

• SHIFT+CLEAR: inserts a blank

• SHIFT+F1-F10: inserts a number (1, 2, 3, …, 8, 9, 0)

Once the name is complete, press ENTER to validate or MENU to cancel.

While the operator is in the secondary menu, he has full control of the current clip with the

lever, PLAY key and jog dial, so he can browse the clip and start a replay at any time.

It is also possible to assign keywords and ranking to a clip before it is created. Indeed,

when a record train is loaded, as soon as the operator marks an IN or OUT point, the main

and secondary menu changes to make the Keyword functions available.

154 7. Keyword Management

EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 220 221

No comments

EVS Multicam LSM User Manual Page 164