EVS Multicam LSM User Manual download pdf (Page 40)

Practical example

The operator builds a playlist with Fills and another playlist with Keys. He sets the Playlist

Load parameter to Conditional in the setup menu, then enters the 2PGM mode, selects

the Fills playlist as current playlist, presses A to gain control on PGM1, presses PLST two

or three times to enter the PLST DIFF mode and cue up the Fills playlist to its 1st clip.

Then he presses the TAKE key to return to the PGM selection menu, selects the Keys

playlist as current playlist, presses B to gain control on PGM2, presses PLST two or three

times to enter the PLST DIFF mode and cue up the Keys playlist to its 1st clip. Then he

presses the TAKE key to return to the PGM selection menu, presses D to gain control on

both PGM channels, then presses TAKE to enter the PLST DIFF menu. He will see the

content of both playlists side by side on the LCD screen, and can browse them or play

them in Sync at any speed, and perform SKIP and NEXT commands as needed.

3.3.3. Multi PGM Secondary Menu Controls

The secondary menu can be called by pressing the MENU key and is similar to the

1PGM+PRV mode, except that the A function is empty since it is not possible to create a

transition between the channels in this mode.

See section "1PGM+PRV Secondary Menu Controls" on page 23 for a description of the

other functions of the secondary menu.

30 3. Control Modes

EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 220 221

No comments

EVS Multicam LSM User Manual Page 40