EVS Multicam LSM User Manual download pdf (Page 64)

Playback Speed Options

• To play back a selected clip, with the lever, at a speed varying from 0% to a given

maximum speed, you need to do the following:

◦ Define the requested maximum speed in the PGM Speed/Var max parameter

(p.9.1 F3) in the Operational Setup menu.

◦ Select (highlight) the VarMax option in the secondary menu in PGM/PRV mode.

• To play back a selected clip, with the lever, at a given predefined speed, you need to

do the following:

◦ Define the requested maximum speed in the PGM Speed/Var max parameter

(p.9.1 F3) in the Operational Setup menu.

◦ Select (highlight) the PGMSpd option in the secondary menu in PGM/PRV mode.

Options for Camera Angle Selection

• If PREF is 'ON', the preferred camera angle of the clip appears on the primary

channel, the secondary camera angle on the next controlled channel, and the other

camera angles on the next channels in alphabetical order.

◦ Example: If the preferred camera angle for clip 124 is camera C, when loading the

clip, 124C is loaded on the primary channel, whatever the camera present on that

channel before loading the clip.

• If PREF is 'OFF', the camera angle will be the same as the one already present on

each controlled channel. If that camera angle does not exist, the first available camera

angle of the clip is used.

◦ Example: If camera B is the current camera on the primary channel, when calling

clip 124, it is 124B that appears on the primary channel, even if it is not the

preferred camera angle.

• When the operator is controlling only one channel (such as with PRV CTL), the clip

appears at that location only. In the case of a clip containing a single camera angle (so

only an 'A', 'B', 'C', or 'D' clip), when in full control of all outputs, the clip recalled will

appear on the primary channel.

Growing Clips

You can recall and play back growing clips, or clips that are in the process of being

created on a disk.

• As long as the OUT point of a growing clip is not available on the EVS server, the LED

corresponding to the growing clip location blinks green when it is called and red when

it is loaded on the Remote Panel. The clip LED will no longer blink as soon as both IN

and OUT points are available on the EVS server.

• If the play reaches the end of the available material, it freezes until new material is

available for play back. As soon as new material is available, the play resumes.

• When the OUT point of the clip is known, the remaining time is displayed, otherwise

the remaining time display is '--:--:--:--' until the entire clip is copied.

54 4. Clip Management

EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 220 221

No comments

EVS Multicam LSM User Manual Page 64